Publications
Publications currently being reviewed will appear after final decisions.
Journals and Magazines
 A. Mirza, H. Nguyen, W. Chen, A.M. Bazzi, Y. Cao, and L. Hao, “Modelling Electrical Aging of Polyimide Kapton HN Under HighVoltage HighFrequency PWM Waveforms,” in IEEE Transactions on Dielectrics and Electrical Insulation, 2022, Accepted.
 A. Mirza, A. M. Bazzi, H. Nguyen, and Y. Cao, “Motor Stator Insulation Stress Due to Multilevel Inverter Voltage Output Levels and Power Quality,” in Energies, 2022, Accepted.
 Z. Zhang and A.M. Bazzi, “A Virtual Impedance Enhancement Based Transformerless Active EMI Filter for Conducted EMI Suppression in Power Converters,” in IEEE Transactions on Power Electronics, 2022, Accepted.
 Q. Yang, M.A. Gultekin, K. Pattipati, A.M. Bazzi, F. Palmieri, S. Joshi, M. Farooq, H. Ukegawa, and R. Rajamani, ““Incipient Residualbased Anomaly Detection in Power Electronic Devices,” in IEEE Transactions on Power Electronics, 2021, Accepted.
 W. Chen and A.M. Bazzi, “Modelbased Voltage Quality Analysis and Optimization in Postfault Reconfigured NLevel NPC Inverter,” in IEEE Transactions on Power Electronics, vol. 36, no. 12, pp. 1370613715, Dec. 2021.
 H. Nguyen, A. Y. Mirza, W. Chen, Y. Liu, J. Ronzello, J. Chapman, A. M. Bazzi, Y. Cao, “Investigation of 2D NanoStructured Winding Insulation for High Torque Density MediumVoltage Motor,” in IEEE Access, vol. 9, pp. 22742282, 2021.
 Z. Zhang and A.M. Bazzi, “Commonmode Voltage Reduction in VSIfed Motor Drives with An Integrated Active Zerostate Switch,” in IEEE Journal on Emerging and Selected Topics in Power Electronics,” Accepted, 2020.
 Z. Zhang, L. Wei, P. Yi, Y. Cui, P. S. Murthy, and A. M. Bazzi, “Conducted Emissions Suppression of Active Front End (AFE) Drive Based on Random Switching Frequency PWM,” in IEEE Transactions on Industry Applications, Accepted, 2020.
 W. Chen, L. Zhang, K. Pattipati, A.M. Bazzi, S. Joshi, and E.M. Dede, “DataDriven Approach for Fault Prognosis of SiC MOSFETs,” in IEEE Transactions on Power Electronics, vol. 35, pp. 40484062, 2019.
 N. Karakasis, E. Tsioumas, N. Jabbour, A.M. Bazzi, and C. Mademlis, “Optimal Efficiency Control in a Wind System with Doubly Fed Induction Generator,” in IEEE Transactions on Power Electronics, vol. 24, pp. 356368, 2019.
 Y. Liu, M. Stettenbenz, and A.M. Bazzi, “Smooth FaultTolerant Control of Induction Motor Drives with Sensor Failures,” in IEEE Transactions on Power Electronics, vol. 19, pp. 35443552, 2019.
 A. M. Bazzi, Y. Liu, and D. Fay, “Electric Machines and Energy Storage: Over a Century of Technologies in Electric and Hybrid Electric Vehicles,” in IEEE Electrification Magazine, vol. 6, pp. 4953, 2018.
 W. Chen, E. Hotchkiss, and A.M. Bazzi, “Reconfiguration of NPC Multilevel Inverters to Mitigate Short Circuit Faults Using BacktoBack Switches,” in CPSS Transactions on Power Electronics and Applications, vol. 3, pp. 4655, 2018.
 A. Xenophontos and A.M. Bazzi, “Modelbased Maximum Power Curves of Solar Photovoltaic Panels under Partial Shading Conditions,” in IEEE Journal of Photovoltaics, vol. 8, pp. 233 – 238, 2018.
 A. Silva, S. Gupta, A.M. Bazzi, and A. Ulatowski, “Waveletbased Information Filtering for Fault Diagnosis of Electric Drive Systems in Electric Ships,” in ISA Transactions, vol. 78, pp. 105115, 2018.
 Y. Liu and A.M. Bazzi, “A Review and Comparison of Fault Detection and Diagnosis Methods for SquirrelCage Induction Motors: State of the Art”, in ISA Transactions, vol. 70, pp. 400409, 2017.
 Y. Liu and A.M. Bazzi, “A General Analytical ThreePhase Induction Machine Core Loss Model in the Arbitrary Reference Frame,” in IEEE Transactions on Industry Applications, vol. 53, pp. 4210 – 4220, 2017.
 S. M. Park, W. Chen, A.M. Bazzi, and S.Y. Park, “A TimeEfficient Approach for Modelling and Simulation of Aggregated Multiple Photovoltaic Microinverters” in Energies, pp. 119, Apr. 2017.
 A. M. Bazzi, M. Stettenbenz, and Y. Liu, “Switched Control Systems Applied to SafetyCritical Motor Drives” in IEEE Transportation Electrification Community eNewsletter, pp. 13, Sep. 2016.
 W. Chen and A.M. Bazzi, “LogicBased Methods for Intelligent Fault Diagnosis and Recovery in Power Electronics” in IEEE Transactions on Power Electronics, pp. 5573 – 5589, Jul. 2017.
 A. Kulkarni, W. Chen, and A.M. Bazzi, “Implementation of Rapid Prototyping Tools for Power Loss and Cost minimization of DCDC Converters,” in Energies, vol. 9, pp. 135, June 2016.
 J. Hare, X. Shi, S. Gupta and A.M. Bazzi, “Faults and Diagnostics in Smart MicroGrid Electrical Energy Infrastructure: A Review,” in Renewable & Sustainable Energy Reviews, vol. 60, pp. 11141124, 2015.
 A. Ulatowski and A.M. Bazzi, “A CombinationalLogic Method for Electric Vehicle Drivetrain Fault Diagnosis,” in IEEE Transactions on Industry Applications, vol. 52, pp. 1796 – 1807.
 S. M. Park, S.Y. Park, and A.M. Bazzi, “Input Impedance and Current Feedforward Control of SinglePhase Boost PFC Converters,” in Journal of Power Electronics, vol. 15, no. 3, pp.577586, 2015.
 V. T. Buyukdegirmenci, A.M. Bazzi and P.T. Krein, “Evaluation of Induction and PermanentMagnet Synchronous Machines Using DriveCycle Energy and Loss Minimization in Traction Applications,” in IEEE Transactions on Industry Applications, vol. 50, no. 1, pp. 395403, Jan.Feb. 2014.
 A. M. Bazzi and P.T. Krein “Ripple Correlation Control in Power Electronic Applications from an ExtremumSeeking Perspective,” in IEEE Transactions on Power Electronics, vol.29, no.2, pp.988995, Feb. 2014.
 A. M. Bazzi, V.T. Buyukdegirmenci, and P.T. Krein, “SystemLevel Power Loss Sensitivity to Various Control Variables in VectorControlled Induction Motor Drives,” in IEEE Transactions on Industry Applications, vol.49, no.3, pp.13671373, MayJune 2013.
 A. M. Bazzi, Zach Klein, Micah Sweeney, Kevin Kroeger, Pradeep Shenoy, and Philip T. Krein, “SolidState Light Simulator with CurrentMode Control,” in IEEE Transactions on Industry Applications, vol. 48, no. 4, pp. 11951202, Jul.Aug. 2012.
 A. M. Bazzi, P.T. Krein, J.W. Kimball, and K. Kepley, “IGBT and Diode Loss Estimation under Hysteresis Switching,” in IEEE Transactions on Power Electronics, vol. 27, no. 3, pp. 10441048, March 2012.
 A. M. Bazzi, A.D. DominguezGarcia, and P.T. Krein, “Markov Reliability Modeling of Induction Motor Drives under FieldOriented Control,” in IEEE Transactions on Power Electronics, vol. 27, no. 2, pp. 534546, Feb. 2012.
 A. M. Bazzi and P.T. Krein, “Concerning “Maximum Power Point Tracking for Photovoltaic Optimization Using RippleBased Extremum Seeking Control,” in IEEE Transactions on Power Electronics (Correspondence), vol. 26, no. 6, pp. 16111612, June 2011.
 A. M. Bazzi and P.T. Krein, “Review of Methods for RealTime Loss Minimization in Induction Machines,” IEEE Transactions on Industry Applications, vol. 46, no. 6, pp. 23192328, Nov.Dec. 2010.
Patents and Invention Disclosures

D. McMenemy, J. Kaminski, S.N. Joshi, A.M. Bazzi, and K. Pattipati, “Systems and methods for falsepositive reduction in power electronic device evaluation,” US Patent 11,293,981.
 A. M. Bazzi, L. Zhang, W. Chen, K. Pattipati, D. McMenemy, S. Joshi, “Mitigating Data Offsets for Machine Learning,” US Patent 11,169,899.

E. M. Dede, S. N. Joshi, L. Zhang, W. Chen, K. Pattipatti, and A. M. Bazzi, “Distributed Architecture for Fault Monitoring,” US Patent 11,113,168.
 D. McMenemy, W. Chen, A.M. Bazzi, K.R. Pattipati, and S.N. Joshi, “Systems and methods for detecting a fault or a model mismatch,” US Patent 11,093,315.
 A.M. Bazzi, Y. Liu, and B. Davis, “System and Methods for Fault Diagnosis in Machines,” US Patent 10,928,455.
 L. Zhang, W. Chen, K. Pattipati, A.M. Bazzi, S. Joshi, and E. Dede, “Fault Diagnosis Using Distributed PCA Architecture,” US Patent 10,650,616.
 L. Zhang, W. Chen, K. Pattipati, A.M. Bazzi, S. Joshi, and E. Dede, “Fault Diagnosis in Power Electronics Using Adaptive PCA,” US Patent 10,354,462.
 A.M. Bazzi, A. Ulatowski, and Y. Liu, “A Method for Minimum Power Loss and Maximum Efficiency Operation in Motor Drives Using Behavioral Modeling,” US Patent 10,148,210.
 A.M. Bazzi and Philip T. Krein, “AngleBased Speed Estimation of Alternating Current Machines Utilizing a Median Filter,” US Patent 9,954,624.
 A.M. Bazzi and Philip T. Krein, “System and Method for Compensating for High Frequency Application of Ripple Correlation to Minimize Power Losses in Induction Machines,” US Patent 9,007,014.
 A.M. Bazzi and M. Stettenbenz, “Smooth Switching Control Method in Electric Motor Drives,” UCONN Invention Disclosure, 15038.
 M. Tahhan and A.M. Bazzi, “CMM that uses multiple LVDTs to measure pipes,” UCONN Invention Disclosure, 15016.
 M. Tahhan and A.M. Bazzi, “CMM that uses an LVDT to measure pipes,” UCONN Invention Disclosure, 15015.
PeerReviewed and Refereed Conference Publications
 Chebbo, A.M. Bazzi, S. Karaki, and A. Asaad “Market Design Approach for Unreliable Grid with Distributed Generation and Private Microgrids,” in Proc. North American Power Symposium (NAPS), 2021, pp. 0105.
 Zhang and A.M. Bazzi, “Optimized Modulation Scheme with Minimized Amplitude and Frequency in CMV for VSIFed Motor Drives,” in Proc. IEEE Energy Conversion Congress and Exposition, 2021, pp. 28192824.
 Y. Mirza, H. H. Nguyen, A.M Bazzi, Y. Cao, “Investigating the effect of multilevel inverters on motor stator insulation stress”, in Proc. IEEE Energy Conversion Congress and Exposition, 2021, pp. 55695572.
 Y. Mirza, W. Chen, A.M. Bazzi, “Understanding the Impact of Wide Bandgap Inverter Topology on Mediumvoltage Insulation Reflectedwave Stress Using Impedance Characterization”, in Proc. IEEE Applied Power Electronics Conference, 2021, pp. 15051508.
 A. Gultekin, Z. Zhang and A.M. Bazzi, “DataDriven Modeling of InverterFed Induction Motor Drives using DMDc for Faulty Conditions”, in Proc. IEEE International Electric Machines and Drives Conference, 2021, pp. 15.
 A. Gultekin, Q. Yang, A.M. Bazzi, K. Pattipati, S. Joshi, M. Farooq, H. Ukegawa, “High and Lowfrequency Accelerated Stress Tests for Aging Assessment of MOSFET Parameters”, in Proc. IEEE International Electric Machines and Drives Conference, 2021, pp. 14.
 Hassan and A.M. Bazzi, “Adaptive Loss Minimization Technique of Induction Motor Drives Using Extended Kalman Filter,” in Proc. IEEE International Electric Machines & Drives Conference, 2021, pp. 15.
 Y. Mirza, A.M. Bazzi, “Effects of WBG Devices in MediumVoltage Inverters on Induction Machine Stator Insulation”, in Proc. IEEE International Electric Machines & Drives Conference, 2021, pp. 14.
 Zhang, M. A. Gultekin, and A. M. Bazzi, “Statespace Modeling of Multimodecontrolled Induction Motor Drive,” in Proc. IEEE International Electric Machines & Drives Conference, 2021, pp. 15.
 Nasser Eldeen and A.M. Bazzi, “A Power Rerouting Strategy in Electrical Microgrids Under Power Electronics Faults,” in IEEE Power and Energy Conference at Illinois, 2021, pp. 14.
 Chebbo, A.M. Bazzi, A. Yassine, S. Karaki, and N. Ghaddar, “TOU Tariff System Using Data from Smart Meters,” in IEEE Power and Energy Conference at Illinois, 2021, pp. 15.
 Seferian, A.M. Bazzi and H. Hajj, “Condition Monitoring of DClink Capacitors in Gridtied Solar Inverters Using DataDriven Techniques,” 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, pp. 53185323.
 Hassan and A.M. Bazzi, “OpenCircuit Fault Reconfiguration of Multiphase Interleaved DCDC Converter,” 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, pp. 25112515.
 Zhang and A.M. Bazzi, “Modeling, Design, and Implementation of a Novel Transformerless Feedforwardcontrolled Active EMI Filter for ACDC Power Converters,” 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, pp. 58495854.
 Hassan, H. Sadek, A.M. Bazzi and N. Daher, “LQI Control for Dualinput DCDC Converter,” 2020 IEEE Transportation Electrification Conference & Expo (ITEC), 2020, pp. 556560.
 Blake, W. Chen and A.M. Bazzi, “Direct Calculation of SVPWM Switching Sequence for Reconfigurable NLevel Inverter in Propulsion Applications,” 2020 IEEE Transportation Electrification Conference & Expo (ITEC), 2020, pp. 942947.
 A. Al Kader Hammoud and A. M. Bazzi, “Adaptive Ripple Correlation Control (ARCC) for Solar Maximum Power Point Tracking,” 2020 IEEE Power and Energy Conference at Illinois (PECI), 2020, pp. 17.
 A. Al Kader Hammoud and A. M. Bazzi, “Modelbased MPPT with Corrective Ripple Correlation Control,” 2020 IEEE Power and Energy Conference at Illinois (PECI), 2020, pp. 16.
 Zhang, A. M. Bazzi and A. Semin, “An Active ZeroState Switch (AZS) for Commonmode Voltage Reduction in Voltage Source Inverter (VSI) Drives,” 2020 IEEE Applied Power Electronics Conference and Exposition (APEC), 2020, pp. 711717.
 McMenemy, W. Chen, L. Zhang, K. Pattipati, A. M. Bazzi and S. Joshi, “A Machine Learning Approach for Adaptive Classification of Power MOSFET Failures,” 2019 IEEE Transportation Electrification Conference and Expo (ITEC), 2019, pp. 18.
 Mirza, J. Dupont and A.M. Bazzi, “Modeling, reconfiguration and loss modeling of multidrive propulsion system under inverter faults in allelectric ships,” in Proc. IEEE Electric Ship Technologies Symposium, 2019, pp. 201209.
 Z. Zhang and A.M. Bazzi, “Robust Sensorless Scalar Control of Induction Motor Drives with Torque Capability Enhancement at Low Speeds,” in Proc. IEEE International Electric Machines and Drives Conference, 2019, pp. 17061710.
 W. Chen and A.M. Bazzi, “Fault Prognostics of Multilevel Inverters Using OnState Resistance Evolution,” in Proc. IEEE Energy Conversion Congress and Exposition, 2018, pp. 7292 – 7296.
 A.Y. Mirza, W. Chen, H. Nguyen, Y. Cao and A. M. Bazzi, “HighVoltage HighFrequency Testing for MediumVoltage Motor Insulation Degradation,” in Proc. IEEE Energy Conversion Congress and Exposition, 2018, pp. 24442447.
 Z. Zhang, A. M. Bazzi and J. D. Monte, “A Novel PWMcontrolbased Strategy for Noise Reduction in Switched Reluctance Motors,” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, pp. 10171022.
 E. Hotchkiss, W. Chen and A. Bazzi, “ControlStrategyBased Reconfiguration to Mitigate Short Circuit Faults in NPC Inverters,” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, pp. 783787.
 H. Nguyen, A. Y. Mirza, W. Chen, J. Ronzello, J. Chapman, A. M. Bazzi, Y. Cao, “Discharge Resistant Epoxy/Clay Nanocomposite for High Torque Density Electrical Propulsion,” in Proc. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 2018, pp. 171174.
 Z. Zhang, W. Chen, A. M. Bazzi, S. Ramsay, J. Czapor and J. Aslanidis, “A new active EMI filter with virtual impedance enhancement,” 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), 2018, pp. 23932397.
 W. Chen, E. Hotchkiss and A. Bazzi, “Harmonics and voltage quality in postfault reconfigured multilevel inverters,” 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), 2018, pp. 29272932.
 A. Y. Mirza, W. Chen and A. Bazzi, “The impact of load sharing on multidrive propulsion drive system efficiency,” 2017 IEEE Transportation Electrification Conference (ITECIndia), 2017, pp. 15.
 W. Chen, E. Hotchkiss, C. Mademlis, and A.M. Bazzi, “Integrated Fault Diagnosis and Recovery in NPC Multilevel Inverters,” in Proc. IEEE International Symposium on Diagnostics, Power Electronics and Drives, 2017, pp. 415 – 421.
 Y. Liu, H. Nguyen, A.M. Bazzi, and Y. Cao, “Torque Enhancement and ReRating of Medium Voltage Induction Machines Using NanoStructured Stator Winding Insulation,” in Proc. IEEE Electric Ship Technologies Symposium, 2017, pp. 232 – 237.
 H. Nguyen, Y. Liu, W. Chen, M. Ghassemi, J. Chapman, A.M. Bazzi, and Y. Cao, “Nanostructured Insulation for High Torque Density Electric Propulsion Motors,” in Proc. IEEE Electric Ship Technologies Symposium, 2017, pp. 274 – 279.
 Y. Liu and A.M. Bazzi, “Improved Maximum TorqueperAmpere Control of Induction Machines by Considering Iron Loss,” in Proc. IEEE International Electric Machines and Drives Conference, 2017, pp.16.
 Y. Liu and A.M. Bazzi, “Adaptive Modulation TimeDomain Fault Diagnosis of ThreePhase Induction Machines,” in Proc. IEEE International Electric Machines and Drives Conference, 2017, pp.17.
 W. Chen, P. Han, and A.M. Bazzi, “Evaluation of HBridge and HalfBridge Resonant Converters in CapacitiveCoupled Wireless Charging,” in Proc. IEEE Applied Power Electronics Conference, 2017, pp. 26662672.
 Z. Zhang, Y. Liu, and A.M. Bazzi, “An Improved HighPerformance OpenLoop V/F Control Method for Induction Machines,” in Proc. IEEE Applied Power Electronics Conference, 2017, pp. 61519.
 Z. Zhang, J.D. Monte, A. Robinson, and A.M. Bazzi, “Electrical Parameter Characterization for Switched Reluctance Motor,” in Proc. Electrical Manufacturing and Coil Winding Conference, 2016, pp. 3439.
 Y. Liu and A.M. Bazzi, “Impact of Line Frequency Change on Induction Machine Equivalent Circuit Parameters and Power Losses,” in Proc. Electrical Manufacturing and Coil Winding Conference, 2016, pp. 1115.
 A. Ulatowski, Y. Liu, and A.M. Bazzi, “Behavioral Model of Induction Motor Drive Efficiency for Maximum Efficiency Operation,” in Proc. IEEE Energy Conversion Congress and Exposition, 2015, pp. 48944898.
 X. Shi and A.M. Bazzi, “Solar Photovoltaic Power Electronic Systems: Design for Reliability Approach,” in Proc. IEEE European Power Electronics Conference (ECCE Europe), 2015, pp. 18.
 Y. Liu, P. Han, and A.M. Bazzi, “A Comparison of Rotor Bar Material for Induction Machine Efficiency Enhancement,” in Proc. IEEE European Power Electronics Conference (ECCE Europe), 2015, pp. 18.
 X. Shi and A.M. Bazzi, “Reliability Modeling and Analysis of a Microgrid with Significant Clean Energy Penetration,” in Proc. IEEE International Conference on Power Electronics (ICPE – ECCE Asia), 2015, pp. 202207.
 A. Ulatowski and A.M. Bazzi, “Induction motor emulation for variable frequency drives testing,” in Proc. IEEE International Electric Machines and Drives Conference, 2015, pp. 16.
 Y. Liu and A.M. Bazzi, “A Comprehensive Analytical Power Loss Model of an Induction Motor Drive System with Loss Minimization Control,” in Proc. IEEE International Electric Machines and Drives Conference, 2015, pp. 16.
 M. Stettenbenz, P. Vicente, and A.M. Bazzi, “Embedded System Considerations for Advanced Algorithms in Electric Drives,” in Proc. IEEE International Electric Machines and Drives Conference, 2015, pp. 15.
 W. Chen, A. Ulatowski, and A.M. Bazzi, “Thresholdbased Power Grid Fault Diagnosis”, in Proc. IEEE Power & Energy Society General Meeting, 2015, pp. 15.
 Y. Liu and A.M. Bazzi, “A Detailed Induction Machine Core Loss Model in the Arbitrary Reference Frame,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2015, pp. 26172622.
 A. Ulatowski and A.M. Bazzi, “Combinationallogicbased traction inverter fault diagnosis,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2015, pp. 27722778.
 M. Stettenbenz, Y. Liu, and A.M. Bazzi, “Smooth Switching Controllers for an Induction Motor Drive for Reliable Operation After Sensor Failures,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2015, pp. 24072411.
 X. Shi and A.M. Bazzi, “Fault Tree Analysis of a Microgrid Using Monte Carlo Simulations,” in Proc. IEEE Power and Energy Conference at Illinois, 2015, pp. 15.
 J. Hare, X. Shi, S. Gupta, and A.M. Bazzi, “A Review of Approaches for Fault Diagnosis in Smart MicroGrid Components,” in Proc. IEEE Energy Conversion Congress and Exposition, 2014, pp. 33253332.
 A. Xenophontos and A.M. Bazzi, “Analytical Modeling of PV Maximum Power Curves under Uniform and Partial Shading Conditions,” in Proc. IEEE Photovoltaics Specialists Conference, 2014, pp.19821986.
 L. Wang and A.M. Bazzi, “A Dual AC and DC Output Flyback Converter for DC and AC Applications,” in Proc. IEEE Workshop on Control and Modeling for Power Electronics, 2014, pp. 15.
 W. Chen and A.M. Bazzi, “A Fuzzy Logic Approach for Fault Diagnosis and Recovery in PHEV and EV Chargers,” in Proc. IEEE Transportation Electrification Conference, 2014, pp. 15.
 M. Tahhan and A.M. Bazzi, “A Uniform Temperature Test Rig for Thermoelectric Generator Characterization and Testing,” in Proc. IEEE Power and Energy Conference at Illinois, 2014, pp. 15
 A. Xenophontos, J. Rarey, A. Trombetta, and A.M. Bazzi, “A Flexible LowCost Photovoltaic Solar Panel Emulation Platform Based on Multiple Analytical Models,” in Proc. IEEE Power and Energy Conference at Illinois, 2014, pp. 15.
 S.M. Park, A.M. Bazzi, S.Y. Park, and W. Chen, “A TimeEfficient Simulation Strategy and Modeling for Aggregated Multiple Microinverters in LargeScale PV Systems,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2014, pp. 2754 – 2761.
 A.V. Kulkarni and A.M. Bazzi, “A BuildingBlock Approach to Efficiency and Cost Models of Power Electronic Systems,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2014, pp. 2727 – 2734.
 W. Chen and A.M. Bazzi, “A Generalized Approach for Intelligent Fault Detection and Recovery in Power Electronic Systems,” in Proc. IEEE Energy Conversion Congress and Exposition, 2013, pp. 4559 – 4564.
 A.Silva, A.M. Bazzi, and S. Gupta, “Fault diagnosis in electric drives using machine learning approaches,” in Proc. IEEE International Electric Machines and Drives Conference, 2013, pp. 722726.
 A.M. Bazzi, “Electric machines and energy storage technologies in EVs and HEVs for over a century,” in Proc. IEEE International Electric Machines and Drives Conference, 2013, pp. 212219.
 A.M. Bazzi and Philip T. Krein, “Utilization of Median Filters in Power Electronics: Traction Drive Applications,” IEEE Applied Power Electronics Conference, 2013, pp. 30553060.
 A. Kulkarni and A.M. Bazzi, “Empirical Cost and Analytical Power Loss Models of DC/DC Inductors,” in Proc. Electrical Manufacturing and Coil Winding Conference, 2013, pp.15.
 E. Hofreiter and A.M. Bazzi, “SingleStage Boost Inverter Reliability in Solar Photovoltaic Applications”, in Proc. IEEE Power and Energy Conference at Illinois, 2012, pp.14.
 A.M. Bazzi, V.T. Buyukdegirmenci, and P.T. Krein, “SystemLevel Power Loss Sensitivity to Various Control Variables in VectorControlled Induction Motor Drives”, in Proc. IEEE Applied Power Electronics Conference, 2012, pp. 16191624.
 A.M. Bazzi and P.T. Krein, “Constrained Online Efficiency Optimization to Guarantee Load Support in Motor Drives”, inProc.IEEE International Electric Machines and Drives Conference, 2011, pp. 11491152.
 A.M. Bazzi, X. Ding, A. DominguezGarcia, and P.T. Krein, “CircuitBased Reliability Models of an Induction Motor Drive under Different Control Schemes and SafeMode Operation,” in Proc. IEEE Applied Power Electronics Conference, 2011, pp. 653660.
 A.M. Bazzi, K. Kim, B. Johnson, P.T. Krein, and A. DominguezGarcia, “Fault Impacts on Solar Power Unit Reliability,” in Proc. IEEE Applied Power Electronics Conference, 2011, pp. 12231231.
 A.M. Bazzi, Z. Klein, M. Sweeney, K. Kroeger, P.S. Shenoy, and P.T. Krein, “SolidState Light Source Simulator with CurrentMode Control, in Proc. IEEE Applied Power Electronics Conference, 2011, pp. 20472053.
 P.S. Shenoy, V.T. Buyukdegirmenci,A.M. Bazzi, and P.T. Krein, “SystemLevel Tradeoffs of Microprocessor Supply Voltage Reduction,” in Proc. IEEE International Conference on Energy Aware Computing, 2010, pp.14.
 A.M. Bazzi and P.T. Krein, “An Overview of Loss Minimization in Machines,” Electrical Manufacturing and Coil Winding Conference, 2010.
 A.M. Bazzi and P.T. Krein, “Comparative Evaluation of Induction Machines for Electric and Hybrid Vehicle Applications Based on Dynamic Loss Minimization and DriveCycle Energy,” in Proc. IEEE Energy Conversion Congress and Exposition, 2010, pp. 33453351.
 V.T. Buyukdegirmenci, A.M. Bazzi, and P.T. Krein, “A Comparative Study of an Adaptive Perturb and Observe Algorithm and Ripple Correlation Control for RealTime Optimization,” in Proc. IEEE Workshop on Control and Modeling of Power Electronics, 2010, pp.18.
 A.M. Bazzi, A. DominguezGarcia, and P.T. Krein, “A method for impact assessment of faults on the performance of fieldoriented control drives: A first step to reliability modeling”, in Proc. IEEE Applied Power Electronics Conference, 2010, pp. 256263.
 K. Kroeger, S. Choi, A.M. Bazzi, B. Johnson, and P.T. Krein, “A digital implementation of continuoustime ripple correlation control for photovoltaic application”,in Proc. Power and Energy Conference at Illinois, 2010, pp. 711.
 S.Choi, A.M. Bazzi, and P.T. Krein, “Ripple Correlation Control Applied to Electric Vehicle Regenerative Braking”, in Proc. Power and Energy Conference at Illinois, 2010, pp. 8892.
 A.M. Bazzi and P.T. Krein, “Comprehensive Flux Estimator Implementation Procedures for Advanced Control of InverterFed Induction Machines,” in Proc. Electrical Manufacturing and Coil Winding Conference, 2009, pp. 19.
 A.M. Bazzi, A.P. Friedl, S. Choi, and P.T. Krein, “Comparison of induction motor drives for electric vehicle applications: dynamic performance and parameter sensitivity analyses,” in Proc. IEEE International Electric Machines and Drives Conference, 2009, pp. 639646.
 A.M. Bazzi and P.T. Krein, “A survey of realtime power loss minimizers for induction motors,” in Proc. IEEE Electric Ship Technologies Symposium, 2009, pp. 98106.
 A.M. Bazzi, J. Kimball, K. Kepley, and P. Krein, “A simple analysis tool for estimating power losses in an IGBTdiode pair under hysteretic control in threephase inverters,” in Proc. Applied Power Electronics Conference, 2009, pp. 98106.
 A. Davoudi, A.M. Bazzi, and P.L. Chapman, “Application of synergetic control theory to nonsinusoidal PMSMs via multiple reference frame theory,” in Proc. Annual Conference of the IEEE Industrial Electronics Society, 2008, pp. 27942799.
 A.M. Bazzi and P.T. Krein, “Input power minimization of an induction motor operating from an electronic drive under ripple correlation control,” in Proc. IEEE Power Electronics Specialists Conference, 2008, pp. 46754681.
 A.M. Bazzi and S. Karaki, “Simulation of a New Maximum Power Point Tracking Technique of Multiple Photovoltaic PV Arrays,” in Proc. IEEE International Conference on Electro Information Technology, 2008, pp.175178.
 A.M. Bazzi and D. Fares, “GISbased wind farm site selection in Lebanon,” in Proc. IEEE International Conference on Electro Information Technology, 2008, pp.201204.
Technical Reports and Other Publications
 P. T. Krein and A.M. Bazzi, “IEEE Transportation Electrification Community: Overview and 2016 Highlights,” in IEEE Electrification Magazine, vol. 5, pp. 7273, March 2017.
 Z. Zhang and M. Bazzi, “Noisefree Inverter,” IMCORP, 2018.
 Z. Zhang, W. Chen, and M. Bazzi, “Active EMI Noise Filter for a ThreePhase Inverter,” DRS Consolidated Controls, 2016.
 A. M. Bazzi, Y. Liu, A. Ulatowski, and M. Stettenbenz, “Energy and Timeefficient Embedded Systems for Energyefficient Electromechanics,” United Technologies Corporation – Building and Industrial Systems, 2015.
 R. Necci, A.M. Bazzi, S.Y. Park, U. Pasaogullari, P. Singh, N. Butterfield, J. Weiss, and A. Xenophontos, “Energy Efficiency and Reliability Solutions For Rail Operations and Facilities,” Connecticut Academy of Science and Engineering, CT2283F145, 2014.
 Z. Klein, Kevin Kroeger, Micah Sweeney, and A. M. Bazzi, “SolidState Light Simulator,” Grainger Center for Electric Machinery and Electromechanics, Dec. 2010.
 A. M. Bazzi and P.T. Krein, “Comprehensive Flux Estimator Implementation Procedure for Advanced Control of InverterFed Induction Machines,” How2Power Today Newsletter, June 2010.
 A.M. Bazzi and P.T. Krein, “A Complete Procedure for State Estimation in Induction Machines,” Grainger Center for Electric Machinery and Electromechanics, April 2009.
 S. Karaki and A.M. Bazzi, Power electronics experiments controlled using LabVIEW FPGA, Power Electronics Education Workshop (PEEW07), Orlando, Florida, June 16 20, 2007.