Publications

Publications

Publications currently being reviewed will appear after final decisions.

Journals and Magazines

  1. A. Mirza, H. Nguyen, A.M. Bazzi, and Y. Cao, “Prediction of Breakdown Time of Insulation Material for use in Medium-voltage Inverter-fed Marine Propulsion Motor Applications,” in IEEE Transactions on Transportation Electrification, Accepted, 2023.
  2. M.A. Gultekin, and A.M. Bazzi, “Review of Fault Detection and Diagnosis Techniques for AC Motor Drives,” Energies, vol. 16, pp. 5602, 2023.
  3. M.A. Gultekin, Z. Zhang, and A.M. Bazzi, “Dynamic Mode Decomposition for Real-time System Estimation of Induction Motor Drives,” in IEEE Transactions on Industry Applications, vol. 59, no. 2, pp. 1836-1848, 2023.
  4. A. Mirza, H. Nguyen, Chen, A.M. Bazzi, Y.  Cao, and L. Hao, “Modelling Electrical Aging of Polyimide Kapton HN Under High-Voltage High-Frequency PWM Waveforms,” in IEEE Transactions on Dielectrics and Electrical Insulation, vol. 29, no. 6, pp. 2394-2401, Dec. 2022.
  5. A. Mirza, A. M. Bazzi, H. Nguyen, and Y. Cao, “Motor Stator Insulation Stress Due to Multilevel Inverter Voltage Output Levels and Power Quality,” in Energies, vol. 15, pp. 4091, 2022.
  6. Z. Zhang and A.M. Bazzi, “A Virtual Impedance Enhancement Based Transformer-less Active EMI Filter for Conducted EMI Suppression in Power Converters,” in IEEE Transactions on Power Electronics, vol. 37, no. 10, pp. 11962-11973, Oct. 2022.
  7. Q. Yang, M.A. Gultekin, K. Pattipati, A.M. Bazzi, F. Palmieri, S. Joshi, M. Farooq, H. Ukegawa, and R. Rajamani, ““Incipient Residual-based Anomaly Detection in Power Electronic Devices,” in IEEE Transactions on Power Electronics, vol. 37, no. 6, pp. 7315-7332, June 2022.
  8. Z. Zhang and A.M. Bazzi, “Common-mode Voltage Reduction in VSI-fed Motor Drives with An Integrated Active Zero-state Switch,” in IEEE Journal on Emerging and Selected Topics in Power Electronics,” vol. 10, no. 3, pp. 3371-3382, June 2022.
  9. W. Chen and A.M. Bazzi, “Model-based Voltage Quality Analysis and Optimization in Post-fault Reconfigured N-Level NPC Inverter,” in IEEE Transactions on Power Electronics, vol. 36, no. 12, pp. 13706-13715, Dec. 2021.
  10. H. Nguyen, A. Y. Mirza, W. Chen, Y. Liu, J. Ronzello, J. Chapman, A. M. Bazzi, Y. Cao, “Investigation of 2D Nano-Structured Winding Insulation for High Torque Density Medium-Voltage Motor,” in IEEE Access, vol. 9, pp. 2274-2282, 2021.
  11. Z. Zhang, L. Wei, P. Yi, Y. Cui, P. S. Murthy, and A. M. Bazzi, “Conducted Emissions Suppression of Active Front End (AFE) Drive Based on Random Switching Frequency PWM,” in IEEE Transactions on Industry Applications, vol. 56, no. 6, pp. 6598-6607, Nov.-Dec. 2020.
  12. W. Chen, L. Zhang, K. Pattipati, A.M. Bazzi, S. Joshi, and E.M. Dede, “Data-Driven Approach for Fault Prognosis of SiC MOSFETs,” in IEEE Transactions on Power Electronics, vol. 35, pp. 4048-4062, 2019.
  13. N. Karakasis, E. Tsioumas, N. Jabbour, A.M. Bazzi, and C. Mademlis, “Optimal Efficiency Control in a Wind System with Doubly Fed Induction Generator,” in IEEE Transactions on Power Electronics, vol. 24, pp. 356-368, 2019.
  14. Y. Liu, M. Stettenbenz, and A.M. Bazzi, “Smooth Fault-Tolerant Control of Induction Motor Drives with Sensor Failures,” in IEEE Transactions on Power Electronics, vol. 19, pp. 3544-3552, 2019.
  15. A. M. Bazzi, Y. Liu, and D. Fay, “Electric Machines and Energy Storage: Over a Century of Technologies in Electric and Hybrid Electric Vehicles,” in IEEE Electrification Magazine, vol. 6, pp. 49-53, 2018.
    • W. Chen, E. Hotchkiss, and A.M. Bazzi, “Reconfiguration of NPC Multilevel Inverters to Mitigate Short Circuit Faults Using Back-to-Back Switches,” in CPSS Transactions on Power Electronics and Applications, vol. 3, pp. 46-55, 2018.
    • A. Xenophontos and A.M. Bazzi, “Model-based Maximum Power Curves of Solar Photovoltaic Panels under Partial Shading Conditions,” in IEEE Journal of Photovoltaics, vol. 8, pp. 233 – 238, 2018.
    • A. Silva, S. Gupta, A.M. Bazzi, and A. Ulatowski, “Wavelet-based Information Filtering for Fault Diagnosis of Electric Drive Systems in Electric Ships,” in ISA Transactions, vol. 78, pp. 105-115, 2018.
    • Y. Liu and A.M. Bazzi, “A Review and Comparison of Fault Detection and Diagnosis Methods for Squirrel-Cage Induction Motors: State of the Art”, in ISA Transactions, vol. 70, pp. 400-409, 2017.
    • Y. Liu and A.M. Bazzi, “A General Analytical Three-Phase Induction Machine Core Loss Model in the Arbitrary Reference Frame,” in IEEE Transactions on Industry Applications, vol. 53, pp. 4210 – 4220, 2017.
    • S. M. Park, W. Chen, A.M. Bazzi, and S.Y. Park, “A Time-Efficient Approach for Modelling and Simulation of Aggregated Multiple Photovoltaic Microinverters” in Energies, pp. 1-19, Apr. 2017.
    • A. M. Bazzi, M. Stettenbenz, and Y. Liu, “Switched Control Systems Applied to Safety-Critical Motor Drives” in IEEE Transportation Electrification Community eNewsletter, pp. 1-3, Sep. 2016.
    • W. Chen and A.M. Bazzi, “Logic-Based Methods for Intelligent Fault Diagnosis and Recovery in Power Electronics” in IEEE Transactions on Power Electronics, pp. 5573 – 5589, Jul. 2017.
    • A. Kulkarni, W. Chen, and A.M. Bazzi, “Implementation of Rapid Prototyping Tools for Power Loss and Cost minimization of DC-DC Converters,” in Energies, vol. 9, pp. 1-35, June 2016.
    • J. Hare, X. Shi, S. Gupta and A.M. Bazzi, “Faults and Diagnostics in Smart Micro-Grid Electrical Energy Infrastructure: A Review,” in Renewable & Sustainable Energy Reviews, vol. 60, pp. 1114-1124, 2015.
    • A. Ulatowski and A.M. Bazzi, “A Combinational-Logic Method for Electric Vehicle Drivetrain Fault Diagnosis,” in IEEE Transactions on Industry Applications, vol. 52, pp. 1796 – 1807.
    • S. M. Park, S.Y. Park, and A.M. Bazzi, “Input Impedance and Current Feedforward Control of Single-Phase Boost PFC Converters,” in Journal of Power Electronics, vol. 15, no. 3, pp.577-586, 2015.
    • V. T. Buyukdegirmenci, A.M. Bazzi and P.T. Krein, “Evaluation of Induction and Permanent-Magnet Synchronous Machines Using Drive-Cycle Energy and Loss Minimization in Traction Applications,” in IEEE Transactions on Industry Applications, vol. 50, no. 1, pp. 395-403, Jan.-Feb. 2014.
    • A. M. Bazzi and P.T. Krein “Ripple Correlation Control in Power Electronic Applications from an Extremum-Seeking Perspective,” in IEEE Transactions on Power Electronics, vol.29, no.2, pp.988-995, Feb. 2014.
    • A. M. Bazzi, V.T. Buyukdegirmenci, and P.T. Krein, “System-Level Power Loss Sensitivity to Various Control Variables in Vector-Controlled Induction Motor Drives,” in IEEE Transactions on Industry Applications, vol.49, no.3, pp.1367-1373, May-June 2013.
    • A. M. Bazzi, Zach Klein, Micah Sweeney, Kevin Kroeger, Pradeep Shenoy, and Philip T. Krein, “Solid-State Light Simulator with Current-Mode Control,” in IEEE Transactions on Industry Applications, vol. 48, no. 4, pp. 1195-1202, Jul.-Aug. 2012.
    • A. M. Bazzi, P.T. Krein, J.W. Kimball, and K. Kepley, “IGBT and Diode Loss Estimation under Hysteresis Switching,” in IEEE Transactions on Power Electronics, vol. 27, no. 3, pp. 1044-1048, March 2012.
    • A. M. Bazzi, A.D. Dominguez-Garcia, and P.T. Krein, “Markov Reliability Modeling of Induction Motor Drives under Field-Oriented Control,” in IEEE Transactions on Power Electronics, vol. 27, no. 2, pp. 534-546, Feb. 2012.
    • A. M. Bazzi and P.T. Krein, “Concerning “Maximum Power Point Tracking for Photovoltaic Optimization Using Ripple-Based Extremum Seeking Control,” in IEEE Transactions on Power Electronics (Correspondence), vol. 26, no. 6, pp. 1611-1612, June 2011.
    • A. M. Bazzi and P.T. Krein, “Review of Methods for Real-Time Loss Minimization in Induction Machines,” IEEE Transactions on Industry Applications, vol. 46, no. 6, pp. 2319-2328, Nov.-Dec. 2010.

      Patents and Invention Disclosures

      1. D. McMenemy, J. Kaminski, S.N. Joshi, A.M. Bazzi, and K. Pattipati, “Systems and methods for false-positive reduction in power electronic device evaluation,” US Patent 11,293,981.
      2. A. M. Bazzi, L. Zhang, W. Chen, K. Pattipati, D. McMenemy, S. Joshi, “Mitigating Data Offsets for Machine Learning,” US Patent 11,169,899.
      3. E. M. Dede, S. N. Joshi, L. Zhang, W. Chen, K. Pattipatti, and A. M. Bazzi, “Distributed Architecture for Fault Monitoring,” US Patent 11,113,168.
      4. D. McMenemy, W. Chen, A.M. Bazzi, K.R. Pattipati, and S.N. Joshi, “Systems and methods for detecting a fault or a model mismatch,” US Patent 11,093,315.
      5. A.M. Bazzi, Y. Liu, and B. Davis, “System and Methods for Fault Diagnosis in Machines,” US Patent 10,928,455.
      6. L. Zhang, W. Chen, K. Pattipati, A.M. Bazzi, S. Joshi, and E. Dede, “Fault Diagnosis Using Distributed PCA Architecture,” US Patent 10,650,616.
      7. L. Zhang, W. Chen, K. Pattipati, A.M. Bazzi, S. Joshi, and E. Dede, “Fault Diagnosis in Power Electronics Using Adaptive PCA,” US Patent 10,354,462.
      8. A.M. Bazzi, A. Ulatowski, and Y. Liu, “A Method for Minimum Power Loss and Maximum Efficiency Operation in Motor Drives Using Behavioral Modeling,” US Patent 10,148,210.
      9. A.M. Bazzi and Philip T. Krein, “Angle-Based Speed Estimation of Alternating Current Machines Utilizing a Median Filter,” US Patent 9,954,624.
      10. A.M. Bazzi and Philip T. Krein, “System and Method for Compensating for High Frequency Application of Ripple Correlation to Minimize Power Losses in Induction Machines,” US Patent 9,007,014.
      11. A.M. Bazzi and M. Stettenbenz, “Smooth Switching Control Method in Electric Motor Drives,” UCONN Invention Disclosure, 15-038.
      12. M. Tahhan and A.M. Bazzi, “CMM that uses multiple LVDTs to measure pipes,” UCONN Invention Disclosure, 15-016.
      13. M. Tahhan and A.M. Bazzi, “CMM that uses an LVDT to measure pipes,” UCONN Invention Disclosure, 15-015.

      Peer-Reviewed and Refereed Conference Publications

      1. L. Chebbo and A.M. Bazzi, ” Reliability Modeling and Analysis of DC Space Microgrids,” in Proc. IEEE International Conference on DC Microgrids, 2023, In Press.
      2. M. A. Gultekin and A.M. Bazzi, ” Fault Detection in Parallel Devices of H-Bridge Inverters Using On-state Voltages”, in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), 2023, In Press.
      3. U. Kutrolli, P. Thoyer, M. A. Gultekin and A.M. Bazzi, ” Model-based Fault Diagnostics in Cascaded H-Bridge Inverters with Level-shifted Modulation”, in Proc. IEEE Energy Conversion Congress and Exposition, 2023, In Press.
      4. H. Nisar and A.M. Bazzi, “Design Considerations of Variable Pole Induction Motors for EV Applications”, in Proc. IEEE Energy Conversion Congress and Exposition, 2023, In Press.
      5. P. Li and A.M. Bazzi, “A Three-Port DC-DC Converter for Multi-directional Energy Exchange in Microgrids”, in Proc. IEEE Energy Conversion Congress and Exposition, 2023, In Press.
      6. H. Nisar, A.Y. Mirza, and A.M. Bazzi, “Thermal Evaluation of Stator Liner and Winding Insulation in Power Traction Motors,” in Proc. IEEE International Transportation Electrification Conference, 2023, pp. 1-5.
      7. P. Li, M. Silverman, and A.M. Bazzi, “Fault-Tolerant Power-Sharing Strategy with A Novel MPPT Method for Parallel PV Converters in Electric Airplanes,” in Proc. IEEE International Transportation Electrification Conference, 2023, pp. 1-6.
      8. M. A. Gultekin and A.M. Bazzi, “Data-Driven Denoising Technique for IFOC Induction Machine Drives to Improve Torque Response”, in Proc. IEEE International Electric Machines & Drives Conference, 2023, pp. 1-5.
      9. P. Li, A.M. Bazzi, H. Lin and M. A. Gultekin, “Seamless Start-up Method of PMSM Drive from Open-Loop Id/F to Position Sensorless FOC,” in Proc. IEEE International Electric Machines & Drives Conference, 2023, pp. 1-5.
      10. L. Chebbo. M.A. Gultekin, A.M. Bazzi, R. Tomsatik, K. Pattipati, L. Vaccino, M. Azimi, and A. Lund, “Modeling and Operation of Microgrids for Deep Space Habitats Under Environmental Disturbances,” in Proc. IEEE Power and Energy Conference at Illinois, 2023, pp. 1-5.
      11. A. Y. Mirza, A.M. Bazzi, and Y. Cao, “Reconfiguration of Multilevel Inverters and Their Impact on Insulation Breakdown Time,” in Proc. IEEE Applied Power Electronics conference, 2023, pp. 881-884.
      12. M. A. Gultekin and A.M. Bazzi, “Real-Time Data-Driven System Identification of Motor Drive Systems Using Online DMD,” in Proc. IEEE Energy Conversion Congress and Exposition, 2022, pp. 1-7.
      13. A. Hassan, A. M. Bazzi and F. Jensen, “A Comparison Between Nonlinear Kalman Filters for Sensorless Induction Motor Drives,” in Proc. IEEE Energy Conversion Congress and Exposition (ECCE), 2022, pp. 1-6.
      14. J. K. Marrott and A. M. Bazzi, “Optimizing Shipboard Integrated Power System Design with Power Flow Constraints,” in Proc. IEEE Power and Energy Conference at Illinois (PECI), 2022, pp. 1-4.
      15. V. Seferian and A. M. Bazzi, “Comprehensive Induction Motor Fault Diagnosis Using Extremum Seeking Control,” in Proc. IEEE Transportation Electrification Conference & Expo (ITEC), 2022, pp. 1011-1014.
      16. A.Y. Mirza, A. Konstantinou, H. Nguyen, A. M. Bazzi and Y. Cao, “Novel Machine Insulation Material for Transportation Electrification Applications,” in Proc. IEEE Transportation Electrification Conference & Expo (ITEC), 2022, pp. 890-893.
      17. L. Chebbo, A.M. Bazzi, S. Karaki, and A. Asaad “Market Design Approach for Unreliable Grid with Distributed Generation and Private Microgrids,” in Proc. North American Power Symposium (NAPS), 2021, pp. 01-05.
      18. Z. Zhang and A.M. Bazzi, “Optimized Modulation Scheme with Minimized Amplitude and Frequency in CMV for VSI-Fed Motor Drives,” in Proc. IEEE Energy Conversion Congress and Exposition, 2021, pp. 2819-2824.
      19. A.Y. Mirza, H. H. Nguyen, A.M Bazzi, Y. Cao, “Investigating the effect of multilevel inverters on motor stator insulation stress”, in Proc. IEEE Energy Conversion Congress and Exposition, 2021, pp. 5569-5572.
      20. A.Y. Mirza, W. Chen, A.M. Bazzi, “Understanding the Impact of Wide Bandgap Inverter Topology on Medium-voltage Insulation Reflected-wave Stress Using Impedance Characterization”, in Proc. IEEE Applied Power Electronics Conference, 2021, pp. 1505-1508.
      21. M.A. Gultekin, Z. Zhang and A.M. Bazzi, “Data-Driven Modeling of Inverter-Fed Induction Motor Drives using DMDc for Faulty Conditions”, in Proc. IEEE International Electric Machines and Drives Conference, 2021, pp. 1-5.
      22. M.A. Gultekin, Q. Yang, A.M. Bazzi, K. Pattipati, S. Joshi, M. Farooq, H. Ukegawa, “High- and Low-frequency Accelerated Stress Tests for Aging Assessment of MOSFET Parameters”, in Proc. IEEE International Electric Machines and Drives Conference, 2021, pp. 1-4.
      23. A. Hassan and A.M. Bazzi, “Adaptive Loss Minimization Technique of Induction Motor Drives Using Extended Kalman Filter,” in Proc. IEEE International Electric Machines & Drives Conference,  2021, pp. 1-5.
      24. Y. Mirza, A.M. Bazzi, “Effects of WBG Devices in Medium-Voltage Inverters on Induction Machine Stator Insulation”, in Proc. IEEE International Electric Machines & Drives Conference,  2021, pp. 1-4.
      25. Z. Zhang, M. A. Gultekin, and A. M. Bazzi, “State-space Modeling of Multi-mode-controlled Induction Motor Drive,” in Proc. IEEE International Electric Machines & Drives Conference,  2021, pp. 1-5.
      26. A. Nasser Eldeen and A.M. Bazzi, “A Power Rerouting Strategy in Electrical Microgrids Under Power Electronics Faults,” in IEEE Power and Energy Conference at Illinois, 2021, pp. 1-4.
      27. L. Chebbo, A.M. Bazzi, A. Yassine, S. Karaki, and N. Ghaddar, “TOU Tariff System Using Data from Smart Meters,” in IEEE Power and Energy Conference at Illinois, 2021, pp. 1-5.
      28. V. Seferian, A.M. Bazzi and H. Hajj, “Condition Monitoring of DC-link Capacitors in Grid-tied Solar Inverters Using Data-Driven Techniques,” 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, pp. 5318-5323.
      29. A. Hassan and A.M. Bazzi, “Open-Circuit Fault Reconfiguration of Multiphase Interleaved DC-DC Converter,” 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, pp. 2511-2515.
      30. Z. Zhang and A.M. Bazzi, “Modeling, Design, and Implementation of a Novel Transformer-less Feedforward-controlled Active EMI Filter for AC-DC Power Converters,” 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 2020, pp. 5849-5854.
      31. A. Hassan, H. Sadek, A.M. Bazzi and N. Daher, “LQI Control for Dual-input DC-DC Converter,” 2020 IEEE Transportation Electrification Conference & Expo (ITEC), 2020, pp. 556-560.
      32. J. Blake, W. Chen and A.M. Bazzi, “Direct Calculation of SVPWM Switching Sequence for Reconfigurable N-Level Inverter in Propulsion Applications,” 2020 IEEE Transportation Electrification Conference & Expo (ITEC), 2020, pp. 942-947.
      33. H.A. Al Kader Hammoud and A. M. Bazzi, “Adaptive Ripple Correlation Control (ARCC) for Solar Maximum Power Point Tracking,” 2020 IEEE Power and Energy Conference at Illinois (PECI), 2020, pp. 1-7.
      34. H.A. Al Kader Hammoud and A. M. Bazzi, “Model-based MPPT with Corrective Ripple Correlation Control,” 2020 IEEE Power and Energy Conference at Illinois (PECI), 2020, pp. 1-6.
      35. Z. Zhang, A. M. Bazzi and A. Semin, “An Active Zero-State Switch (AZS) for Common-mode Voltage Reduction in Voltage Source Inverter (VSI) Drives,” 2020 IEEE Applied Power Electronics Conference and Exposition (APEC), 2020, pp. 711-717.
      36. D. McMenemy, W. Chen, L. Zhang, K. Pattipati, A. M. Bazzi and S. Joshi, “A Machine Learning Approach for Adaptive Classification of Power MOSFET Failures,” 2019 IEEE Transportation Electrification Conference and Expo (ITEC), 2019, pp. 1-8.
      37. A.Y. Mirza, J. Dupont and A.M. Bazzi, “Modeling, reconfiguration and loss modeling of multi-drive propulsion system under inverter faults in all-electric ships,” in Proc. IEEE Electric Ship Technologies Symposium, 2019, pp. 201-209.
      38. Z. Zhang and A.M. Bazzi, “Robust Sensorless Scalar Control of Induction Motor Drives with Torque Capability Enhancement at Low Speeds,” in Proc. IEEE International Electric Machines and Drives Conference, 2019, pp. 1706-1710.
      39. W. Chen and A.M. Bazzi, “Fault Prognostics of Multilevel Inverters Using On-State Resistance Evolution,” in Proc. IEEE Energy Conversion Congress and Exposition, 2018, pp. 7292 – 7296.
      40. A.Y. Mirza, W. Chen, H. Nguyen, Y. Cao and A. M. Bazzi, “High-Voltage High-Frequency Testing for Medium-Voltage Motor Insulation Degradation,” in Proc. IEEE Energy Conversion Congress and Exposition, 2018, pp. 2444-2447.
      41. Z. Zhang, A. M. Bazzi and J. D. Monte, “A Novel PWM-control-based Strategy for Noise Reduction in Switched Reluctance Motors,” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, pp. 1017-1022.
      42. E. Hotchkiss, W. Chen and A. Bazzi, “Control-Strategy-Based Reconfiguration to Mitigate Short Circuit Faults in NPC Inverters,” 2018 IEEE Transportation Electrification Conference and Expo (ITEC), 2018, pp. 783-787.
      43. H. Nguyen, A. Y. Mirza, W. Chen, J. Ronzello, J. Chapman, A. M. Bazzi, Y. Cao, “Discharge Resistant Epoxy/Clay Nanocomposite for High Torque Density Electrical Propulsion,” in Proc. IEEE Conference on Electrical Insulation and Dielectric Phenomena, 2018, pp. 171-174.
      44. Z. Zhang, W. Chen, A. M. Bazzi, S. Ramsay, J. Czapor and J. Aslanidis, “A new active EMI filter with virtual impedance enhancement,” 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), 2018, pp. 2393-2397.
      45. W. Chen, E. Hotchkiss and A. Bazzi, “Harmonics and voltage quality in post-fault reconfigured multi-level inverters,” 2018 IEEE Applied Power Electronics Conference and Exposition (APEC), 2018, pp. 2927-2932.
      46. A. Y. Mirza, W. Chen and A. Bazzi, “The impact of load sharing on multi-drive propulsion drive system efficiency,” 2017 IEEE Transportation Electrification Conference (ITEC-India), 2017, pp. 1-5.
      47. W. Chen, E. Hotchkiss, C. Mademlis, and A.M. Bazzi, “Integrated Fault Diagnosis and Recovery in NPC Multi-level Inverters,” in Proc. IEEE International Symposium on Diagnostics, Power Electronics and Drives, 2017, pp. 415 – 421.
      48. Y. Liu, H. Nguyen, A.M. Bazzi, and Y. Cao, “Torque Enhancement and Re-Rating of Medium Voltage Induction Machines Using Nano-Structured Stator Winding Insulation,” in Proc. IEEE Electric Ship Technologies Symposium, 2017, pp. 232 – 237.
      49. H. Nguyen, Y. Liu, W. Chen, M. Ghassemi, J. Chapman, A.M. Bazzi, and Y. Cao, “Nanostructured Insulation for High Torque Density Electric Propulsion Motors,” in Proc. IEEE Electric Ship Technologies Symposium, 2017, pp. 274 – 279.
      50. Y. Liu and A.M. Bazzi, “Improved Maximum Torque-per-Ampere Control of Induction Machines by Considering Iron Loss,” in Proc. IEEE International Electric Machines and Drives Conference, 2017, pp.1-6.
      51. Y. Liu and A.M. Bazzi, “Adaptive Modulation Time-Domain Fault Diagnosis of Three-Phase Induction Machines,” in Proc. IEEE International Electric Machines and Drives Conference, 2017, pp.1-7.
      52. W. Chen, P. Han, and A.M. Bazzi, “Evaluation of H-Bridge and Half-Bridge Resonant Converters in Capacitive-Coupled Wireless Charging,” in Proc. IEEE Applied Power Electronics Conference, 2017, pp. 2666-2672.
      53. Z. Zhang, Y. Liu, and A.M. Bazzi, “An Improved High-Performance Open-Loop V/F Control Method for Induction Machines,” in Proc. IEEE Applied Power Electronics Conference, 2017, pp. 615-19.
      54. Z. Zhang, J.D. Monte, A. Robinson, and A.M. Bazzi, “Electrical Parameter Characterization for Switched Reluctance Motor,” in Proc. Electrical Manufacturing and Coil Winding Conference, 2016, pp. 34-39.
      55. Y. Liu and A.M. Bazzi, “Impact of Line Frequency Change on Induction Machine Equivalent Circuit Parameters and Power Losses,” in Proc. Electrical Manufacturing and Coil Winding Conference, 2016, pp. 11-15.
      56. A. Ulatowski, Y. Liu, and A.M. Bazzi, “Behavioral Model of Induction Motor Drive Efficiency for Maximum Efficiency Operation,” in Proc. IEEE Energy Conversion Congress and Exposition, 2015, pp. 4894-4898.
      57. X. Shi and A.M. Bazzi, “Solar Photovoltaic Power Electronic Systems: Design for Reliability Approach,” in Proc. IEEE European Power Electronics Conference (ECCE Europe), 2015, pp. 1-8.
      58. Y. Liu, P. Han, and A.M. Bazzi, “A Comparison of Rotor Bar Material for Induction Machine Efficiency Enhancement,” in Proc. IEEE European Power Electronics Conference (ECCE Europe), 2015, pp. 1-8.
      59. X. Shi and A.M. Bazzi, “Reliability Modeling and Analysis of a Microgrid with Significant Clean Energy Penetration,” in Proc. IEEE International Conference on Power Electronics (ICPE – ECCE Asia), 2015, pp. 202-207.
      60. A. Ulatowski and A.M. Bazzi, “Induction motor emulation for variable frequency drives testing,” in Proc. IEEE International Electric Machines and Drives Conference, 2015, pp. 1-6.
      61. Y. Liu and A.M. Bazzi, “A Comprehensive Analytical Power Loss Model of an Induction Motor Drive System with Loss Minimization Control,” in Proc. IEEE International Electric Machines and Drives Conference, 2015, pp. 1-6.
      62. M. Stettenbenz, P. Vicente, and A.M. Bazzi, “Embedded System Considerations for Advanced Algorithms in Electric Drives,” in Proc. IEEE International Electric Machines and Drives Conference, 2015, pp. 1-5.
      63. W. Chen, A. Ulatowski, and A.M. Bazzi, “Threshold-based Power Grid Fault Diagnosis”, in Proc. IEEE Power & Energy Society General Meeting, 2015, pp. 1-5.
      64. Y. Liu and A.M. Bazzi, “A Detailed Induction Machine Core Loss Model in the Arbitrary Reference Frame,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2015, pp. 2617-2622.
      65. A. Ulatowski and A.M. Bazzi, “Combinational-logic-based traction inverter fault diagnosis,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2015, pp. 2772-2778.
      66. M. Stettenbenz, Y. Liu, and A.M. Bazzi, “Smooth Switching Controllers for an Induction Motor Drive for Reliable Operation After Sensor Failures,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2015, pp. 2407-2411.
      67. X. Shi and A.M. Bazzi, “Fault Tree Analysis of a Micro-grid Using Monte Carlo Simulations,” in Proc. IEEE Power and Energy Conference at Illinois, 2015, pp. 1-5.
      68. J. Hare, X. Shi, S. Gupta, and A.M. Bazzi, “A Review of Approaches for Fault Diagnosis in Smart Micro-Grid Components,” in Proc. IEEE Energy Conversion Congress and Exposition, 2014, pp. 3325-3332.
      69. A. Xenophontos and A.M. Bazzi, “Analytical Modeling of PV Maximum Power Curves under Uniform and Partial Shading Conditions,” in Proc. IEEE Photovoltaics Specialists Conference, 2014, pp.1982-1986.
      70. L. Wang and A.M. Bazzi, “A Dual AC and DC Output Flyback Converter for DC and AC Applications,” in Proc. IEEE Workshop on Control and Modeling for Power Electronics, 2014, pp. 1-5.
      71. W. Chen and A.M. Bazzi, “A Fuzzy Logic Approach for Fault Diagnosis and Recovery in PHEV and EV Chargers,” in Proc. IEEE Transportation Electrification Conference, 2014, pp. 1-5.
      72. M. Tahhan and A.M. Bazzi, “A Uniform Temperature Test Rig for Thermoelectric Generator Characterization and Testing,” in Proc. IEEE Power and Energy Conference at Illinois, 2014, pp. 1-5
      73. A. Xenophontos, J. Rarey, A. Trombetta, and A.M. Bazzi, “A Flexible Low-Cost Photovoltaic Solar Panel Emulation Platform Based on Multiple Analytical Models,” in Proc. IEEE Power and Energy Conference at Illinois, 2014, pp. 1-5.
      74. S.M. Park, A.M. Bazzi, S.Y. Park, and W. Chen, “A Time-Efficient Simulation Strategy and Modeling for Aggregated Multiple Microinverters in Large-Scale PV Systems,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2014, pp. 2754 – 2761.
      75. A.V. Kulkarni and A.M. Bazzi, “A Building-Block Approach to Efficiency and Cost Models of Power Electronic Systems,” in Proc. IEEE Applied Power Electronics Conference and Exposition, 2014, pp. 2727 – 2734.
      76. W. Chen and A.M. Bazzi, “A Generalized Approach for Intelligent Fault Detection and Recovery in Power Electronic Systems,” in Proc. IEEE Energy Conversion Congress and Exposition, 2013, pp. 4559 – 4564.
      77. A.Silva, A.M. Bazzi, and S. Gupta, “Fault diagnosis in electric drives using machine learning approaches,” in Proc. IEEE International Electric Machines and Drives Conference, 2013, pp. 722-726.
      78. A.M. Bazzi, “Electric machines and energy storage technologies in EVs and HEVs for over a century,” in Proc. IEEE International Electric Machines and Drives Conference, 2013, pp. 212-219.
      79. A.M. Bazzi and Philip T. Krein, “Utilization of Median Filters in Power Electronics: Traction Drive Applications,” IEEE Applied Power Electronics Conference, 2013, pp. 3055-3060.
      80. A. Kulkarni and A.M. Bazzi, “Empirical Cost and Analytical Power Loss Models of DC/DC Inductors,” in Proc. Electrical Manufacturing and Coil Winding Conference, 2013, pp.1-5.
      81. E. Hofreiter and A.M. Bazzi, “Single-Stage Boost Inverter Reliability in Solar Photovoltaic Applications”, in Proc. IEEE Power and Energy Conference at Illinois, 2012, pp.1-4.
      82. A.M. Bazzi, V.T. Buyukdegirmenci, and P.T. Krein, “System-Level Power Loss Sensitivity to Various Control Variables in Vector-Controlled Induction Motor Drives”, in Proc. IEEE Applied Power Electronics Conference, 2012, pp. 1619-1624.
      83. A.M. Bazzi and P.T. Krein, “Constrained Online Efficiency Optimization to Guarantee Load Support in Motor Drives”, inProc.IEEE International Electric Machines and Drives Conference, 2011, pp. 1149-1152.
      84. A.M. Bazzi, X. Ding, A. Dominguez-Garcia, and P.T. Krein, “Circuit-Based Reliability Models of an Induction Motor Drive under Different Control Schemes and Safe-Mode Operation,” in Proc. IEEE Applied Power Electronics Conference, 2011, pp. 653-660.
      85. A.M. Bazzi, K. Kim, B. Johnson, P.T. Krein, and A. Dominguez-Garcia, “Fault Impacts on Solar Power Unit Reliability,” in Proc. IEEE Applied Power Electronics Conference, 2011, pp. 1223-1231.
      86. A.M. Bazzi, Z. Klein, M. Sweeney, K. Kroeger, P.S. Shenoy, and P.T. Krein, “Solid-State Light Source Simulator with Current-Mode Control, in Proc. IEEE Applied Power Electronics Conference, 2011, pp. 2047-2053.
      87. P.S. Shenoy, V.T. Buyukdegirmenci,A.M. Bazzi, and P.T. Krein, “System-Level Trade-offs of Microprocessor Supply Voltage Reduction,” in Proc. IEEE International Conference on Energy Aware Computing, 2010, pp.1-4.
      88. A.M. Bazzi and P.T. Krein, “An Overview of Loss Minimization in Machines,” Electrical Manufacturing and Coil Winding Conference, 2010.
      89. A.M. Bazzi and P.T. Krein, “Comparative Evaluation of Induction Machines for Electric and Hybrid Vehicle Applications Based on Dynamic Loss Minimization and Drive-Cycle Energy,” in Proc. IEEE Energy Conversion Congress and Exposition, 2010, pp. 3345-3351.
      90. V.T. Buyukdegirmenci, A.M. Bazzi, and P.T. Krein, “A Comparative Study of an Adaptive Perturb and Observe Algorithm and Ripple Correlation Control for Real-Time Optimization,” in Proc. IEEE Workshop on Control and Modeling of Power Electronics, 2010, pp.1-8.
      91. A.M. Bazzi, A. Dominguez-Garcia, and P.T. Krein, “A method for impact assessment of faults on the performance of field-oriented control drives: A first step to reliability modeling”, in Proc. IEEE Applied Power Electronics Conference, 2010, pp. 256-263.
      92. K. Kroeger, S. Choi, A.M. Bazzi, B. Johnson, and P.T. Krein, “A digital implementation of continuous-time ripple correlation control for photovoltaic application”,in Proc. Power and Energy Conference at Illinois, 2010, pp. 7-11.
      93. S.Choi, A.M. Bazzi, and P.T. Krein, “Ripple Correlation Control Applied to Electric Vehicle Regenerative Braking”, in Proc. Power and Energy Conference at Illinois, 2010, pp. 88-92.
      94. A.M. Bazzi and P.T. Krein, “Comprehensive Flux Estimator Implementation Procedures for Advanced Control of Inverter-Fed Induction Machines,” in Proc. Electrical Manufacturing and Coil Winding Conference, 2009, pp. 1-9.
      95. A.M. Bazzi, A.P. Friedl, S. Choi, and P.T. Krein, “Comparison of induction motor drives for electric vehicle applications: dynamic performance and parameter sensitivity analyses,” in Proc. IEEE International Electric Machines and Drives Conference, 2009, pp. 639-646.
      96. A.M. Bazzi and P.T. Krein, “A survey of real-time power loss minimizers for induction motors,” in Proc. IEEE Electric Ship Technologies Symposium, 2009, pp. 98-106.
      97. A.M. Bazzi, J. Kimball, K. Kepley, and P. Krein, “A simple analysis tool for estimating power losses in an IGBT-diode pair under hysteretic control in three-phase inverters,” in Proc. Applied Power Electronics Conference, 2009, pp. 98-106.
      98. A. Davoudi, A.M. Bazzi, and P.L. Chapman, “Application of synergetic control theory to nonsinusoidal PMSMs via multiple reference frame theory,” in Proc. Annual Conference of the IEEE Industrial Electronics Society, 2008, pp. 2794-2799.
      99. A.M. Bazzi and P.T. Krein, “Input power minimization of an induction motor operating from an electronic drive under ripple correlation control,” in Proc. IEEE Power Electronics Specialists Conference, 2008, pp. 4675-4681.
      100. A.M. Bazzi and S. Karaki, “Simulation of a New Maximum Power Point Tracking Technique of Multiple Photovoltaic PV Arrays,” in Proc. IEEE International Conference on Electro Information Technology, 2008, pp.175-178.
      101. A.M. Bazzi and D. Fares, “GIS-based wind farm site selection in Lebanon,” in Proc. IEEE International Conference on Electro Information Technology, 2008, pp.201-204.

      Technical Reports and Other Publications

      1. P. T. Krein and A.M. Bazzi, “IEEE Transportation Electrification Community: Overview and 2016 Highlights,” in IEEE Electrification Magazine, vol. 5, pp. 72-73, March 2017.
      2. Z. Zhang and M. Bazzi, “Noise-free Inverter,” IMCORP, 2018.
      3. Z. Zhang, W. Chen, and M. Bazzi, “Active EMI Noise Filter for a Three-Phase Inverter,” DRS Consolidated Controls, 2016.
      4. A. M. Bazzi, Y. Liu, A. Ulatowski, and M. Stettenbenz, “Energy- and Time-efficient Embedded Systems for Energy-efficient Electro-mechanics,” United Technologies Corporation – Building and Industrial Systems, 2015.
      5. R. Necci, A.M. Bazzi, S.Y. Park, U. Pasaogullari, P. Singh, N. Butterfield, J. Weiss, and A. Xenophontos, “Energy Efficiency and Reliability Solutions For Rail Operations and Facilities,” Connecticut Academy of Science and Engineering, CT-2283-F-14-5, 2014.
      6. Z. Klein, Kevin Kroeger, Micah Sweeney, and A. M. Bazzi, “Solid-State Light Simulator,” Grainger Center for Electric Machinery and Electromechanics, Dec. 2010.
      7. A. M. Bazzi and P.T. Krein, “Comprehensive Flux Estimator Implementation Procedure for Advanced Control of Inverter-Fed Induction Machines,” How2Power Today Newsletter, June 2010.
      8. A.M. Bazzi and P.T. Krein, “A Complete Procedure for State Estimation in Induction Machines,” Grainger Center for Electric Machinery and Electromechanics, April 2009.
      9. S. Karaki and A.M. Bazzi, Power electronics experiments controlled using LabVIEW FPGA, Power Electronics Education Workshop (PEEW07), Orlando, Florida, June 16- 20, 2007.